Next steps
1. Install the assembly inner frame.
2. Install the battery.
3. Install the solid-state drive.
4. Install the WWAN card.
5. Install the WLAN card.
6. Install the base cover.
7. Install the microSD card.
8. Install the SIM card.
9. Follow the procedure in After working inside your computer.
Keyboard assembly
Removing the keyboard assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Enter service mode.
3. Remove the SIM card.
4. Remove the microSD card.
5. Remove the base cover.
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the memory module.
9. Remove the solid-state drive.
10. Remove the battery.
11. Remove the assembly inner frame.
12. Remove the system board.
About this task
The following images indicate the location of the keyboard assembly and provide a visual representation of the removal
procedure.
Removing and installing components
55
To Next Page
Loading...
