Figure 38. SBB IOMs used in ME4 Series storage enclosures
1
4-port FC/iSCSI 2 4-port HD mini-SAS
3 4-port 10GbaseT 4 3-port expansion
Replacing a disk drive carrier module
A disk drive module consists of a disk in a carrier or sled. Disk drive modules are hot-swappable, which means they can be replaced without
halting I/O to the disk groups, or powering o the enclosure. The new disk must be of the same type, and possess capacity equal to or
greater than the one being replaced. Otherwise, the storage system cannot use the new disk to reconstruct the disk group.
Module removal and replacement
53
To Next Page
Loading...
