Figure 40. Removing a LFF disk drive module (2 of 2)
3 Remove the module fully from the drive slot.
CAUTION: To ensure optimal cooling throughout the enclosure, blank drive carrier modules must be installed in all
unused drive slots.
Installing a LFF drive carrier module
1 Release the drive carrier handle by depressing the latch in the handle.
Figure 41. LFF drive carrier module in open position
2 Insert the drive carrier module into the enclosure. Make sure that the drive carrier is positioned such that the top of the disk is facing
up, and the handle opens from the left as you face the enclosure front panel.
Module removal and replacement
55
To Next Page
Loading...
