Figure 42. Installing a LFF drive carrier module (1 of 2)
3 Slide the drive carrier fully into the enclosure.
4 Cam the drive carrier home. The camming foot on the carrier will engage into a slot in the enclosure. Continue to push rmly until the
handle fully engages. You should hear a click as the latch handle engages and holds the handle closed.
Figure 43. Installing a LFF drive carrier module (2 of 2)
5 Using the management interfaces (the ME Storage Manager or CLI), verify whether the health of the new disk is OK. Verify that the
green Disk Activity LED is on/blinking per Disk drive carrier module LEDs. Verify that Ops panel states show no amber module faults.
Replacing a SFF drive carrier module
The removal/replacement procedure for SFF drive carrier modules is basically the same as for LFF models, except that the SFF carriers are
mounted vertically.
Removing a SFF drive carrier module
The removal/replacement procedure for SFF drive carrier modules is basically the same as for LFF models, except that the SFF carriers are
mounted vertically.
1 Press the latch in the carrier handle downward to release the carrier handle so that it can revolve outward as shown below.
56
Module removal and replacement
To Next Page
Loading...
