Figure 44. Removing a SFF disk drive module (1 of 2)
2 Gently move the drive carrier module outward from the drive slot.
Figure 45. Removing a SFF disk drive module (2 of 2)
3 Remove the module fully from the drive slot.
CAUTION
: To ensure optimal cooling throughout the 2U enclosure, blank drive carrier modules must be tted to all
unused drive slots.
Installing a SFF drive carrier module
1 Release the carrier handle by pressing the latch in the handle downwards, and opening the hinged handle as shown in Figure 46. SFF
drive carrier module in open position. Insert the carrier into the enclosure in a vertical position.
NOTE
: Make sure the carrier is positioned such that the disk is on its left side and the handle opens from the top.
Module removal and replacement 57
To Next Page
Loading...
