Figure 70. Removing riser 2 blank
Next step
Install the riser 2 blank.
Identifier GUID-EEBF2E6F-1823-4542-8746-4608CE650C19
Status Released
Installing the riser 2 blank
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the screw and guide rail on the riser blank with the screw hole and stando on the system.
2 Lower the blank into the system until the release tab clicks into place.
3 Tighten the screws to secure the riser blank to the system.
122
Installing and removing system components
To Next Page
Loading...
