Figure 74. Removing expansion card riser 2
Next step
Install the expansion card riser 2.
Identifier GUID-CB15DB2C-0D42-43E2-8E32-4AA12BD70379
Status Released
Installing the expansion card riser 2
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Step
To install expansion card riser 2B:
a Align the slot on the riser with the stando on the system.
b Lower the riser into the system until the riser card connector engages with the connector on the system board.
126
Installing and removing system components
To Next Page
Loading...
