Figure 81. Installing integrated storage controller card cable
Next steps
1 Install the expansion card riser 1.
2 Install the air shroud.
3 Follow the procedure listed in Before working inside your system.
Identifier GUID-7B29205F-3305-4AEA-823B-BF6C0E0C52B4
Status Released
Backplane
Depending on your system conguration, the drive backplanes supported in NX3240 system are listed here:
Table 40. Supported backplane options for NX3240 system
System Supported backplane options
NX3240 system
3.5-inch (x12) SAS/SATA backplane, or
3.5-inch (x12) SAS/SATA backplane, 3.5-inch (x4) SAS/SATA backplane on the mid drive tray and
3.5-inch (x2) SAS/SATA backplane (back), or
3.5-inch (x12) SAS/SATA backplane, 3.5-inch (x4) SAS/SATA backplane on the mid drive tray and
2.5-inch (x4) SAS/SATA backplane (back)
132 Installing and removing system components
To Next Page
Loading...
