Figure 88. Removing the mid drive backplane
Next step
Install the mid drive backplane.
Identifier GUID-7C872060-5246-462E-A017-271D89F6F67F
Status Released
Installing the mid drive backplane
The procedure to install the backplane is identical for 2.5-inch and 3.5-inch congurations.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Step
Align the drive backplane with the guide pin on the system and lower the drive backplane into the system until it is rmly seated.
Installing and removing system components
137
To Next Page
Loading...
