Figure 90. Removing the 3.5-inch rear drive backplane
Next step
Install the 3.5-inch rear drive backplane.
Identifier GUID-A40C850B-EE6C-4B9F-8317-6365B62FCEE2
Status Released
Installing the 3.5-inch rear drive backplane
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Use the hooks on the rear drive module as guides to align the drive backplane.
2 Lower the backplane into the system until it is rmly seated.
Figure 91. Installing 3.5-inch rear drive backplane
Installing and removing system components
139
To Next Page
Loading...
