Next steps
1 Install all the drives.
2 Connect all the cables to the backplane.
3 Follow the procedure listed in After working inside your system.
Identifier GUID-F2E42037-241A-472F-8273-85AC43980AFE
Status Released
Cable routing
Figure 92. Cable routing – 12 x 3.5-inch backplane with mini PERC
1
backplane 2 backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3 backplane power cable (BP: BP1 to MB: BP1) 4 system board
5 mini PERC 6 SAS cable (BP: J_SAS_A0_B0 to mini PERC)
140 Installing and removing system components
To Next Page
Loading...
