Figure 94. Cable routing – 12 x 3.5-inch backplane with 4 x 3.5 mid drive tray and 2 x 3.5 rear drive cage
1
backplane 2 backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3 backplane power cable (BP: BP1 to MB: BP1) 4 SAS cable (BP: A1 BP SAS to mid BP: J_SAS_A1, J_SAS_B1)
5 SAS cable (BP: A2 BP SAS to rear BP: J_SAS_1) 6 mid backplane
7 system board 8 rear backplane
9 SAS cable (BP: J_SAS_A0_B0 to mini PERC)
142 Installing and removing system components
To Next Page
Loading...
