Dell EMC NX3240 - Back View of the System

Identifier GUID-BF75EB7C-1B6A-4FF0-8441-EE6A9F17C419
Status Released
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
iDRAC Direct LED indicator is located below the iDRAC Direct port on the right control panel.
You can congure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 7. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Condition
Solid green for two seconds Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and o for two
seconds)
Indicates that the laptop or tablet connected is recognized.
Turns o Indicates that the laptop or tablet is unplugged.
Identifier GUID-39358644-E4A2-4A9B-8481-3C3DC9E53EB3
Status Released
Back view of the system
Figure 7. Back view of 2 x 3.5-inch drive system
NX3240 system overview
15