Dell EMC NX3240 - Memory Specifications; Storage Controller Specifications; Drive Specifications

Identifier GUID-FC4319BE-D4CA-49C6-A391-198D988B7A06
Status Released
Memory specications
The NX3240 system supports up to twenty four 288-pins RDIMMS with speeds of 2666 MT/s with support for memory optimized
operation.
Table 17. Memory specications
DIMM type DIMM rank
DIMM
capacity
Single processor Dual processors
Minimum RAM Maximum RAM Minimum RAM Maximum RAM
RDIMM Single rank 8 GB 8 GB 96 GB 16 GB 192 GB
RDIMM Dual rank 16 GB 16 GB 192 GB 32 GB 384 GB
Identifier GUID-EE27B8DD-71F2-4AD7-B9C3-257969FCB2FC
Status Released
Storage controller specications
The NX3240 system supports:
• Internal storage controller cards:
– PowerEdge RAID Controller (PERC) H730P mini
• External storage controller cards:
– PERC H840
– 12 Gbps SAS HBA
– JBOD such as MD1400 and MD1420
– SC series
– LTO External drives such as PV114x, TL1000, TL2000, TL4000, ML6000
– Dell EMC ML3 (Base Module) and Dell EMC ML3E (Expansion Module) Tape Libraries
Identifier GUID-CC511C0B-6C22-4867-8CA1-6A94D692A852
Status Released
Drive specications
The NX3240 system supports 18 SAS and SATA hard drives.
Table 18. Supported drives for the NX3240 system
18 drives system Up to 12 3.5-inch (SAS or SATA) front accessible drives in slots 0 to 11, up to four 3.5-inch
(SAS or SATA) mid drives in slots 14 to 17, and up to two 3.5-inch (SAS or SATA) rear
accessible drives in slots 12 to 13
NOTE: The rear accessible drives can also be 2.5-inch (SAS or SATA) in a hybrid carrier.
NOTE: Universal slots are slots that support SAS, and SATA hard drives in the same slot.
28 Technical specications