Dell EMC NX3240 - Page 49

Option Description
HTTP Device n
Settings (n = 1 to 4)
Enables you to control the conguration of the HTTP device.
Identifier GUID-41C938FD-62CE-4CD2-A9F0-5177D712D1E8
Status Released
UEFI iSCSI Settings
You can use the iSCSI Settings screen to modify iSCSI device settings. The iSCSI Settings option is available only in the UEFI boot mode.
BIOS does not control network settings in the BIOS boot mode. For the BIOS boot mode, the option ROM of the network controller
handles the network settings.
NOTE: The Dell EMC Storage NX3240 system supports only BIOS mode. You must not change the boot mode to UEFI because
the system does not boot.
Identifier GUID-C7F98732-0696-4D81-8166-6E78E27B5975
Status Released
Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
About this task
NOTE
: The Dell EMC Storage NX3240 system supports only BIOS mode. You must not change the boot mode to UEFI because
the system does not boot.
Steps
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Network Settings.
5 On the Network Settings screen, click UEFI iSCSI Settings.
Identifier GUID-A9AD647B-0593-427A-86DE-F82DA21FA0B2
Status Released
UEFI iSCSI Settings details
The UEFI iSCSI Settings screen details are explained as follows:
NOTE
: The Dell EMC Storage NX3240 system supports only BIOS mode. You must not change the boot mode to UEFI because
the system does not boot.
Option Description
iSCSI Initiator
Name
Species the name of the iSCSI initiator (iqn format).
Pre-operating system management applications 49