Option Description
F1/F2 Prompt on
Error
Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt also
includes keyboard errors.
Load Legacy Video
Option ROM
N/A
Dell Wyse P25/P45
BIOS Access
Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.
Power Cycle
Request
Enables or disables the Power Cycle Request. This option is set to None by default.
Identifier GUID-8BAA92E6-75A6-4106-9EFB-F82EB229B366
Status Released
iDRAC Settings utility
The iDRAC settings utility is an interface to set up and congure the iDRAC parameters by using UEFI. You can enable or disable various
iDRAC parameters by using the iDRAC settings utility available with iDRAC Enterprise License..
NOTE: The Dell EMC Storage NX3240 system does not support UEFI mode.
For more information about using iDRAC, see Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
Identifier GUID-498E6750-5781-4D13-BEED-2FC736944906
Status Released
Device Settings
Device Settings enables you to congure device parameters.
Identifier GUID-7B817AD4-3AA4-41E8-A199-A85EF2056D00
Status Released
Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, conguration,
update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution.
Identifier GUID-19B8CFAC-81B8-4022-936A-73C1FC438DAE
Status Released
Embedded systems management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the lifecycle of the system. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
NOTE
: Certain platform congurations may not support the full set of features provided by the Dell Lifecycle Controller.
60 Pre-operating system management applications
To Next Page
Loading...
