Dell EMC NX3240 - Installing the Front Bezel

Steps
1 Unlock the bezel by using the bezel key.
2 Press the release button, and pull the left end of the bezel.
3 Unhook the right end, and remove the bezel.
Figure 14. Removing the front bezel with the LCD panel
NOTE
: The images shown here are for representation only and the actual conguration of your system may vary.
Identifier GUID-7656DCD3-7A3E-4F14-A9CF-A80ECDF69992
Status Released
Installing the front bezel
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Locate and remove the bezel key.
NOTE
: The bezel key is part of the LCD bezel package.
2 Align and insert the right end of the bezel onto the system.
3 Press the release button and t the left end of the bezel onto the system.
4 Lock the bezel by using the key.
Installing and removing system components
65