Steps
1 Slide the backplane cover in the direction of the arrows marked on the backplane cover.
2 Lift the backplane cover away from the system.
Figure 18. Removing the backplane cover
NOTE
: The images shown here are for representation only and the actual conguration of your system may vary.
Identifier GUID-C59E9267-8F58-4BA6-8176-FAA6982E853E
Status Released
Installing the backplane cover
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Steps
1 Align the tabs on the backplane cover with the guide slots on the system.
2 Slide the backplane cover toward the front of the system until the cover locks into place.
Installing and removing system components
69
To Next Page
Loading...
