Identifier GUID-F563F222-95B1-4AFE-8543-A4B3B1516701
Status Released
Removing the cooling fan assembly
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Steps
1 Lift the release levers to unlock the cooling fan assembly from the system.
2 Hold the release levers, and lift the cooling fan assembly away from the system.
Figure 23. Removing the cooling fan assembly
NOTE
: The images shown here are for representation only and the actual conguration of your system may vary.
Next step
Install the cooling fan assembly.
74
Installing and removing system components
To Next Page
Loading...
