Dell EMC NX3240 - Installing the Cooling Fan Assembly

Identifier GUID-20AA449A-4946-4CCA-8B69-3AB78D5A36AB
Status Released
Installing the cooling fan assembly
Prerequisite
Follow the safety guidelines listed in Safety instructions.
CAUTION: Ensure that the cables inside the system are correctly installed and retained by the cable retention bracket before
installing the cooling fan assembly. Incorrectly installed cables may get damaged.
Steps
1 Align the guide rails on the cooling fan assembly with the standos on the system.
2 Lower the cooling fan assembly into the system until the cooling fan connectors engage with the connectors on the system board.
3 Press the release levers to lock the cooling fan assembly into the system.
Figure 24. Installing the cooling fan assembly
NOTE
: The images shown here are for representation only and the actual conguration of your system may vary.
Next step
Follow the procedure listed in After working inside your system.
Installing and removing system components
75