Dell EMC NX3240 - Installing a 2.5-Inch Drive into the 3.5-Inch Drive Adapter

Figure 41. Removing a 2.5-inch drive from the 3.5-inch drive adapter
Next step
Install a 2.5-inch drive into the 3.5-inch drive adapter.
Identifier GUID-EFD021DC-43BA-4B7F-B59A-A85C7D3E62F0
Status Released
Installing a 2.5-inch drive into the 3.5-inch drive adapter
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2 Using a Phillips #2 screwdriver, install the screws to secure the drive to the 3.5-inch drive adapter.
Installing and removing system components
93