Removing the mezzanine card bridge board
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your enclosure.
3 Remove the expansion card riser assembly
4 Remove the mezzanine card.
Step
Pull the mezzanine card bridge board away from the mezzanine card slot on the system board.
Figure 68. Removing the mezzanine card bridge board
Next step
1 Install the mezzanine card board bridge.
Installing the mezzanine card bridge board
Prerequisite
1 Follow the safety guidelines listed in Safety instructions.
Step
Insert the mezzanine card bridge board into the mezzanine slot on the system board.
118
Installing and removing enclosure components
To Next Page
Loading...
