Dell EMC PowerEdge C6420 - Dell EMC Poweredge C6420 Sled; Sled Installation Guidelines

• Phillips #2 screwdriver
• 1/4 inch at head screwdriver
• #4 nut driver
• Torx #T30 screwdriver
• Wrist grounding strap
• ESD mat
Dell EMC PowerEdge C6420 sled
Sled Installation Guidelines
NOTE: Ensure to install a sled blank in all the empty slots. Operating the enclosure without a blank results in overheating.
NOTE: For optimized thermal operation, ensure to follow the sled population sequence mentioned below:
64 Installing and removing enclosure components