Dell EMC PowerEdge MX Series - Page 14

Chapter 1: Dell EMC PowerEdge MX Platform Overview
14
Dell EMC PowerEdge MX
Networking Architecture Guide
2. Power and indicator LEDs
3. Module insertion/removal latch
4. 16 SFP28 ports
Figure 12. Dell EMC Networking 10GBASE-T PTM
The following 10GBASE-T PTM components are labeled in Figure 12:
1. Express service tag
2. Power and indicator LEDs
3. Module insertion/removal latch
4. 16 10GBASE-T ports
Note: For information about PTM port to compute sled-mapping, see Appendix A.
The Dell EMC Networking MXG610s is a high-performance, 32 Gb Fibre Channel switch
based on Brocade Gen 6 technology. The MXG610s features 8/16/32 GbE capable
interfaces. It is ideal for connectivity to all-flash SAN storage solutions and is designed for
maximum flexibility and value with “pay-as-you-grow” scalability using a Port on Demand,
or PoD, license model. The MXG610s is compatible with Brocade and Cisco
fabric/director class switches.
Besides sixteen internal 32Gb FC ports, the MXG610s provides:
• Eight 32Gb FC SFP ports
• Two 4x 32Gb FC QSFP ports
The MX7000 chassis supports redundant MXG610s modules in Fabric C and must be
purchased in pairs.
Dell EMC
Networking
MXG610s Fibre
Channel switch