MX9116n-FSE # show discovered-expanders
Service Model Type Chassis Chassis-slot Port-group Virtual
tag service-tag Slot-Id
--------------------------------------------------------------------------
D10DXC2 MX7116n 1 SKY002Z A1 1/1/1
FEM
Once the MX7116n is discovered, the logical interfaces must be provisioned.
SmartFabrics does this automatically. However, in full switch mode the unit-
provision node/unit-id provision_name command must be used.
Note: For more information about virtual ports, see the OS10EE Enterprise Edition Users Guide.
Embedded Top of Rack switching
Most environments with blade servers also have rack servers. Figure 26 shows a typical
design having rack servers connecting to their respective Top of Rack (ToR) switches and
blade chassis connecting to a different set of ToR switches. If the storage array was
Ethernet-based, it can be connected to the core/spine.
To Next Page
Loading...