Dell EMC PowerEdge MX Series - Page 40

Chapter 4: PowerEdge MX Ethernet Switch Operating Modes
40
Dell EMC PowerEdge MX
Networking Architecture Guide
Figure 29. Two MX9116n FSEs in a single chassis topology
Figure 30 shows two MX5108n switches in single chassis configuration. The blue links
represent two ports in a VLTi configuration. The first port is a QSFP+ port and the second
port is a QSFP28 port. In SmartFabric mode the QSFP28 port is configured to operate at
40GbE allowing for a valid port channel.
Note: See Appendix A for more information.
Two M5108n
Ethernet
switches in the
same chassis