Figure 50. QSFP+ cables: Active Optical Cable (AOC)
The PowerEdge MX7000 also supports the use of QSFP+ to SFP+ breakout cables. This
offers the ability to use a QSFP+ port and connect to four SFP+ ports on the terminating
end.
Figures 51 and 52 show the DAC and MPO cables, which are two variations of breakout
cables. The MPO cable in this example attaches to one QSFP+ transceiver and four
SFP+ transceivers.
Figure 51. QSFP+ to SFP+ Breakout cables: Direct Attach Copper (DAC) Breakout
To Next Page
Loading...