4 From the Search For list, select I/O Controller.
5 From the Brand Name list, select DELL.
6 In the Keyword box, enter the model of the disk controller, for example, HBA330 MX.
7 Click Update and View Results.
8 In the Server Device and Model Information section, select the required model.
NOTE: You must use the exact versions of vSAN disk controller rmware and driver combination that is listed in the
VCG. These are not minimum supported versions.
The driver and rmware versions for the selected model are displayed.
Software
The following table lists the software products that were validated in the solution:
Table 2. Software versions compatible with vSphere and vSAN
Software Product Version Build
VMware vSphere ESXi 6.7 EP 06 11675023
IOM Switch OS 10.4.0E.R4S 10.4.0E.R4S.347
VMware Cloud Foundation (includes the following): 3.7.0 12696155
Cloud Builder VM 2.0 12696155
VMware vCenter Server Appliance 6.7 U1b 11726888
VMware NSX Data Center for vSphere 6.4.4 11197766
VMware vRealize Log Insight 4.7 9983377
SDDC Manager 3.7.0 12696155
Firmware and drivers
The following table lists the rmware and ESXi driver versions that were validated in the solution:
Table 3. Firmware and driver versions compatible with vSphere and vSAN
Item Firmware Version ESXi Driver Version
PowerEdge MX740c BIOS 1.6.13 N/A
iDRAC 3.30.30.30 N/A
QLogic 2x25 GbE and
QL41232HMKR
14.07.07 3.7.9.1
HBA 330 MX 16.17.00.03 lsi_msgpt3 version 17.00.01.00-1OEM.670
HBA 330 MMZ 16.17.00.03 lsi_msgpt3 version 17.00.01.00-1OEM.670
PowerEdge MX7000 chassis 1.00.10 N/A
PowerEdge MX5016s storage sled 2.40 N/A
PowerEdge MX5000s storage IOM 1.0.9.6 N/A
Validated components 13
To Next Page
Loading...