Dell EMC PowerEdge MX7000 - Page 55

Figure 28. Chassis PowerEdge MX9002m cabling
Steps
1 After the PowerEdge MX9002m modules have been cabled together, log in to the OME-Modular web interface of the chassis that will
be the lead chassis of the new chassis group.
2 From the Chassis Overview menu, click Congure, and then select Create Chassis Group.
3 Enter the group name and group description.
NOTE: The group name must be one word without any spaces.
4 Select chassis onboarding permissions that propagate to each chassis that is added to the group, and then click Next.
The Add Members page displays the chassis that can be added as members to the group. The lead chassis is not listed here.
5 Select the chassis to be added, and then click Add Chassis.
The selected chassis moves to the Current Members list.
6 Click Finish.
A chassis group is created and the selected members are added.
7 To view the list of jobs that is started by the group creation, click Monitor, and then click Jobs.
8 To view the group members, click OME-M home.
Figure 29. Chassis group members
9 To view the topology, select View Topology in the ChassisGroup pane.
SmartFabric network
conguration 55