Figure 39. Virtual media mapping page
10 From the Virtual Console menu, click Boot, and then click Virtual CD/DVD/ISO.
11 Click Yes.
12 From the Power menu, click Power on System.
13 If the system is not turned on, click Power on System. If the system is ON, click Power Cycle System (cold boot).
The server is connected to the iDRAC devices and boots into the ESXi installer.
Install VMware ESXi
Prerequisite
Before installing VMware ESXi, you must connect to the iDRAC devices and boot into the ESXi installer. For more information, see Connect
to iDRAC and boot installation media.
Steps
1 In the Welcome to ESXi Installation window, press Enter.
2 Review the End User License Agreement (EULA), and then press F11 to accept and continue.
3 On the Select a Disk to Install or Upgrade page, select the DELLBOSS VD device, and then press Enter.
NOTE
: If DELLBOSS VD device has been used for previous ESXi installation, in the ESXi/VMFS Found dialog box,
choose to overwrite the existing VMFS datastore, and then press Enter.
68 Deploy ESXi to cluster nodes
To Next Page
Loading...