Dell EMC PowerEdge MX7000 - Page 74

Figure 45. ESXi—Hosts and Clusters page
4 Locate the OVA le locally or from the URL, and then click Next.
5 Select the required ESXi server to host the Cloud Builder VM, and then click Next.
NOTE
: The selected EXSi server should not be targeted for Cloud Foundation deployment.
6 Click Next.
7 Review the EULA, and if you agree, click Accept, and then click Next to continue.
8 Select the required datastore and then click Next.
9 Select the required network and then click Next.
10 In the Customize Template page, enter username, password, network 1 IP address and subnet mask, default gateway, hostname,
DNS, and NTP resources in the appropriate elds, and then click Next.
CAUTION
: You must adhere to the following password rules that are listed on the screen:
• Noncompliant passwords cause an unrecoverable error when attempting to access and use the Cloud Builder VM in the
next section of the document.
• The password rules vary for dierent user accounts. For example, minimum 8-character rule is applicable to some users
and minimum 12-character rule is applicable to other users.
• You must not enter dictionary words as passwords.
NOTE: IP Address and related elds must align with the IP subnet of the Cloud Foundation Management
VLAN.
74 Cloud Builder OVA deployment