Dell EMC PowerEdge MX7000 - SDDC Bring-Up

Steps
1 In the Bringing Up the SDDC page, click Next to start the deployment of Cloud Foundation.
NOTE: You can monitor the deployment progress on the Bringing Up the SDDC page and this deployment process may
require two hours or more, depending on your environment.
2 If a bring-up failure occurs, expand the failed line item, review the detailed error messages. Depending on the nature of the error,
resolve all the reported failures and click Retry.
NOTE: If an unrecoverable failure occurs during SDDC bring-up, it is necessary to resolve the root cause issue, wipe the
Cloud Foundation target servers including all disk partitions, and then restart from the Deploy ESXi to cluster nodes
section.
3 The SDDC bring-up process is completed when the Cloud Builder reports that the SDDC has been successfully created.
When the SDDC bring-up process is complete, this indicates that the Cloud Foundation is successfully deployed.
4 Access the recently deployed SDDC Manager by clicking the link on the page.
5 Conrm deployment of vCenter, vSAN, NSX, and vRealize Log Insight.
NOTE: Hostnames and IP addresses are in the Cloud Foundation Deployment Parameters spreadsheet.
The Cloud Builder VM can now be discarded.
80 Running Cloud Builder