Dell EMC PowerEdge MX7000 - Post-Install Validation; Foundation Cluster Verification; SDDC Manager; vCenter

Post-install validation
Cloud Foundation Cluster Verication
After installing Cloud Foundation, perform the steps in the following sections to verify that the components are installed and available.
SDDC Manager
Log in to SDDC Manager using a web browser at: https://<ip address or DNS name>. The SSO user ID is
administrator@vsphere.local and the password is the one you specied during installation.
NOTE: Use the domain vsphere.local. Do not use the DNS domain that was used for the Cloud Foundation deployment.
Customer Experience Improvement Program
Join Customer Experience Improvement Program (CEIP) when prompted. CEIP provides statistical data to SDDC Manager, allowing for
improved performance and troubleshooting.
The following gure shows a sample SDDC Manager dashboard. In this example, the host usage is yellow because the management cluster
has consumed all of the hosts currently available to Cloud Foundation.
Figure 50. SDDC Manager dashboard
vCenter
Log in to vCenter using the same SSO credentials—administrator@vsphere.local.
15
Post-install validation 81