Figure 25. Removing a 2.5-inch drive from a 3.5-inch drive adapter
Next step
1 Install a 2.5-inch drive into the 3.5-inch drive adapter.
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Steps
1 Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2 Using a Phillips #1 screwdriver, install the screws to secure the drive to the 3.5-inch drive adapter.
Installing and removing system components
55
To Next Page
Loading...
