Figure 59. Installing the MicroSD card
Next steps
1 Install the IDSDM or vFlash module.
2 Follow the procedure listed in the After working inside your system.
Drive backplane
Drive backplane
The PowerEdge R240 system supports 3.5-inch (x4) SAS/SATA backplane.
Figure 60. 3.5-inch (x4) SAS/SATA backplane
1
Release tab (2) 2 Backplane SAS A0 connector (BP_SAS_A)
3 Backplane Power A connector (BP_PWR_A) 4 Backplane signal connector (BP_SIG)
88 Installing and removing system components
To Next Page
Loading...
