EasyManua.ls Logo

Dell EMC PowerEdge R240 - Restoring the System Using Easy Restore; Trusted Platform Module; Upgrading the Trusted Platform Module

Dell EMC PowerEdge R240
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Restoring the system using Easy Restore
The easy restore feature enables you to restore your service tag, license, UEFI conguration, and the system conguration data after
replacing the system board. All data is backed up in a backup ash device automatically. If BIOS detects a new system board, and the
service tag in the backup ash device, BIOS prompts the user to restore the backup information.
Below is a list of options available:
Restore the service tag, license, and diagnostics information, press Y
Navigate to the Lifecycle Controller based restore options, press N.
Restore data from a previously created Hardware Server Prole, press F10
NOTE: When the restore process is complete, BIOS prompts to restore the system conguration
data.
To restore the system conguration data, press Y
To use the default conguration settings, press N
NOTE: After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
Steps
1 Power on the system.
2 To enter the System Setup, press F2.
3 Click Service Tag Settings.
4 Enter the service tag.
NOTE
: You can enter the service tag only when the Service Tag eld is empty. Ensure that you enter the correct service
tag. Once the service tag is entered, it cannot be updated or changed.
5 Click OK.
Trusted Platform Module
Upgrading the Trusted Platform Module
Prerequisite
NOTE
:
Ensure that your operating system supports the version of the TPM module being installed.
Ensure that you download and install the latest BIOS rmware on your system.
Ensure that the BIOS is congured to enable UEFI boot mode.
About this task
CAUTION
: Once the TPM plug-in module is installed, it is cryptographically bound to that specic system board. Any attempt to
remove an installed TPM plug-in module breaks the cryptographic binding, the removed TPM cannot be reinstalled or installed on
another system board.
Installing and removing system components 99

Table of Contents

Other manuals for Dell EMC PowerEdge R240

Related product manuals