Dell EMC PowerEdge R540 - Right Control Panel View

iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see the
Getting help section.
Right control panel view
Figure 7. Right control panel
Table 7. Right control panel
Item Indicator, button, or connector Icon Description
1 Power button
Indicates if the system is turned on or o. Press
the power button to manually turn on or o the
system.
NOTE: Press the power button to
gracefully shut down an ACPI-
compliant operating system.
2 USB port
The USB ports are 4-pin, 2.0-compliant. These
ports enable you to connect USB devices to the
system.
3 iDRAC Direct (Micro-AB USB) The iDRAC Direct (Micro-AB USB) port enables
you to access the iDRAC Direct (Micro-AB)
features. For more information, see Integrated
Dell Remote Access Controller User's Guide at
Dell.com/poweredgemanuals.
4 iDRAC Direct (Micro-AB USB) LED N/A The iDRAC Direct (Micro-AB USB) LED
indicator lights up to indicate that the iDRAC
Direct port is connected. For more information,
see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/
poweredgemanuals.
Dell EMC PowerEdge R540 overview 15