Removing a 2.5-inch drive from a 3.5-inch drive adapter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
NOTE: A 2.5 inch drive is installed in a 3.5 inch drive adapter, which is then installed in the 3.5-inch drive carrier.
Steps
1 Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5-inch drive adapter.
2 Remove the 2.5-inch drive from the 3.5-inch drive adapter.
Figure 47. Removing a 2.5 inch drive from a 3.5-inch drive adapter
Next step
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Steps
1 Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2 Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
Installing and removing system components
93
To Next Page
Loading...
