Dell EMC PowerEdge R620 - About your system; Front-Panel Features and Indicators

About your system
Topics:
• Front-panel features and indicators
• Lcd panel features
• Conguring iDRAC from the LCD panel
• Diagnostic indicators
• Hard-Drive indicator patterns
• Back-panel features and indicators
• NIC indicator codes
• Power Indicator Codes
• Other Information You May Need
Front-panel features and indicators
Figure 1. Front-panel features and indicators—8 hard drive system
Item
Indicator, Button, or Connector Icon Description
1 Power-on indicator, power
button
The power-on indicator lights when the system power is on. The
power button controls the power supply output to the system.
NOTE: On ACPI-compliant operating systems, turning o
the system using the power button causes the system to
perform a graceful shutdown before power to the system
is turned o.
2 NMI button
Used to troubleshoot software and device driver errors when
running certain operating systems. This button can be pressed
using the end of a paper clip.
Use this button only if directed to do so by qualied support
personnel or by the operating system's documentation.
3 System identication button The identication buttons on the front and back panels can be used
to locate a particular system within a rack. When one of these
buttons is pressed, the LCD panel on the front and the system
status indicator on the back ashes blue until one of the buttons is
pressed again.
1
About your system 7