Dell EMC PowerEdge R740xd2 - Installing a 2.5-Inch Drive into a 3.5-Inch Drive Adapter

Figure 47. Removing a 2.5 inch drive from a 3.5-inch drive adapter
Next step
Replace a 2.5-inch drive into a 3.5-inch drive adapter.
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions .
2 Remove the drive carrier.
Steps
1 Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2 Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
Installing and removing system components
75