Dell EMC PowerEdge R7425 - Page 17

iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 10. iDRAC Quick Sync 2 indicator
Table 9. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
O (default state) Indicates that the iDRAC Quick Sync 2
feature is turned o. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
If the LED fails to turn on, reseat the left control
panel ex cable and check again.
Solid white Indicates that iDRAC Quick Sync 2 is
ready to communicate. Press the iDRAC
Quick Sync 2 button to turn o.
If the LED fails to turn o, restart the system.
Blinks white rapidly Indicates data transfer activity.
N/A
Blinks white slowly Indicates that rmware update is in
progress.
N/A
Blinks white ve times rapidly and
then turns o
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is congured
to be disabled by iDRAC.
For more information, see Integrated Dell Remote
Access Controller User's Guide at Dell.com/
idracmanuals or Dell OpenManage Server
Administrator User’s Guide at Dell.com/
openmanagemanuals.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system.
17