Figure 114. Removing the 3.5 inch rear drive backplane
Next step
Install the 3.5 inch rear drive backplane
.
Installing the 3.5 inch rear drive backplane
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Use the hooks on the rear drive module as guides to align the drive backplane.
2 Lower the backplane into the system until the release pins click in place.
Figure 115. Installing the 3.5 inch rear drive backplane
Next steps
1 Install all the drives into the rear drive cage.
2 Connect all the cables to the backplane.
3 Follow the procedure listed in After working inside your system.
154 Installing and removing system components
To Next Page
Loading...
