Figure 43. Installing a 3.5 inch drive into the 3.5 inch drive carrier
Next steps
1 Install the drive carrier into the mid drive tray.
2 Follow the procedure listed in After working inside your system.
Removing a 2.5 inch drive from the 3.5 inch drive carrier
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the drive carrier from the mid drive tray.
CAUTION: To maintain proper system cooling, all empty drive slots must have drive blanks installed.
Steps
1 Push out at the edges of the carrier to disengage the tabs on the drive carrier from the slots on the drive.
2 Lift the drive carrier away from the drive.
Installing and removing system components 87
To Next Page
Loading...
