Figure 34. Removing the cooling fan cage assembly
Next steps
1. Install the cooling fan cage assembly.
Installing the cooling fan cage assembly
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions on page 46.
CAUTION:
Ensure that the cables inside the system are correctly installed and retained by the cable retention
bracket before installing the cooling fan cage assembly. Incorrectly installed cables may get damaged.
2. Follow the procedure listed in Before working inside your system on page 47.
3. If installed, remove the air shroud.
Steps
1. Align the guide rails on the cooling fan cage assembly with the standoffs on the system.
2. Lower the cooling fan cage assembly into the system until the cooling fan cage connectors engage with the connectors on the system
board.
3. Press the release levers to lock the cooling fan cage assembly into the system.
64
Installing and removing system components
To Next Page
Loading...
