Dell EMC PowerEdge T140 - System Information and Hardware Settings

7
Networking and PCIe
The following lists the supported add in communication cards:
• 1GB Intel (Dual) Powerville Troi-Stony Dual port 1Gb Base-T adapter - FH
• 1GB Intel (Quad) Powerville Lore-Stony Quad port 1Gb Base-T adapter- FH
• 1GB Broadcom (Dual)5720 Bashir Dual port 1Gb Base-T adapter- FH
• 1GB Broadcom (Quad) 5719 Cardassia Quad port 1Gb Base-T adapter - FH
PCIe slots
The PowerEdge T140 chipset provides four PCI Express expansion slots as follows:
• Slot 1 : x8 PCIe Gen3 for FH/HL from CPU (x8 lanes)
• Slot 2 : x16 PCIe Gen3 for FH/HL from CPU (x8 lanes)
• Slot 3 : x1 PCIe Gen3 for FH/HL from PCH (x1 lanes)
• Slot 4 : x8 PCIe Gen3 for FH/HL from PCH (x4 lanes)
The following table shows the PCIe slot location and specications:
PCI Slot
Mechanical Electrical Height Length
1 PCIe x 8 PCIe x 8 Gen 3 Full Height Half Length
2 PCIe x16 PCIe x 8 Gen 3 Full Height Half Length
3 PCIe x 1 PCIe x 1 Gen 3 Full Height Half Length
4 PCIe x 8 PCIe x 4 Gen 3 Full Height Half Length
The following table shows the dimensions of the PCI cards:
Slots
Height Length
Slot 1 (standard height, half length card) 111.15 mm (4.376 inches) maximum 167.65 mm (6.600 inches) maximum
Slot 2 (standard height, half length card) 111.15 mm (4.376 inches) maximum 167.65 mm (6.600 inches) maximum
Slot 3 (standard height, half length card) 111.15 mm (4.376 inches) maximum 167.65 mm (6.600 inches) maximum
Slot 4 (standard height, half length card) 111.15 mm (4.376 inches) maximum 167.65 mm (6.600 inches) maximum
20