Dell EMC PowerEdge T140 - USB Ports; Hard Drives; NIC Ports; Environmental Specifications

USB ports
The PowerEdge T140 supports the USB ports mentioned below:
Table 12. USB specications
System PowerEdge T140
Front panel
• 1 USB 3.0
• 1 Micro USB 2.0 (dedicated iDRAC direct)
Back panel
• 2 USB 3.0
• 4 USB 2.0
Internal One USB 3.0-compliant port
Hard drives
The PowerEdge T140 supports SAS, SATA, Nearline SAS drives/SSD drives. The supported hard drive conguration is 4 x 3.5-inch
cabled conguration.
The following table shows the supported hard drive and capacity:
Feature Description
Hard drives
• 3.5” Enterprise SATA 7.2K HDDs
• 3.5” Near Line SAS 7.2K HDDs
• 3.5” 7.2K SATA Client Drives
Capacity
• 1 TB
• 2 TB
• 4 TB
NOTE: 4TB requires PERC H330 or H730P
NIC ports
The PowerEdge T140 supports two 10/100/1000 Mbps NIC ports at the back panel.
Environmental specications
This section includes the environmental specications for the PowerEdge T140:
Feature
Descriptions
Temperature
• Maximum temperature gradient (Operating and storage)
– 20 °C/h (36 °F/h)
• Storage temperature limits
– –40 °C to 65 °C (–40 °F to 149 °F)
Relative humidity
• 5% to 95% RH with 33 °C (91 °F) maximum dew point.
Atmosphere must be noncondensing at all times.
Temperature (continuous operation)
• Temperature ranges (for altitude less than 950 m or 3117 ft)
35