2
Product features
Product comparison
The following table shows the comparison between the PowerEdge T130 and the PowerEdge T140:
Feature PowerEdge T130 PowerEdge T140
Processor
• Intel® Xeon® processor E3-1200 v6 product
family
• Intel® Core™ i3
• Intel® Pentium®
• Intel® Celeron®
• Intel® Xeon® processor E-2100 product
family
• Intel® Core™ i3
• Intel® Pentium®
• Intel® Celeron®
Front Side Bus
• DMI 3.0 • DMI 3.0
Number of processors
• 1 • 1
Number of cores
• Up to 4 cores • Up to 6 cores
L2/L3 cache
• 2.0 MB per core 4 MB or 8 MB • 2.0 MB per core 8 MB or 12 MB
Chipset
• Intel® C236 chipset • Intel® C246 chipset
DIMMs
• 4 UDIMMS DDR4 Up to 2400MT/s • 4 UDIMMS DDR4 Up to 2666MT/s
Min/Max RAM
• 4GB/64GB • 8GB/64GB
Hard drive bays
• 4x 3.5" cabled • 4x 3.5" cabled
Hard drive types
• 3.5" Enterprise SATA 7.2K HDDs
• 3.5" Near Line SAS 7.2K HDDs
• 3.5" 7.2K SATA Entry Drives
• 3.5" Enterprise SATA 7.2K HDDs
• 3.5" Near Line SAS 7.2K HDDs
• 3.5" 7.2K SATA Entry Drives
External drive bay(s)
• 1x slim ODD 9.5mm • 1x slim ODD 9.5mm
Embedded hard drive controller
• Chipset based SATA PERC S130 (Embedded
SW RAID)
• Chipset based SATA PERC S140
(Embedded SW RAID)
Optional storage controller
• Non-RAID: 12GB SAS HBA
• RAID: PERC Η330, PERC H730, PERC
Η830
• Non-RAID: 12GB SAS HBA, PERC
ΗBA330
• RAID: PERC Η330, PERC H730P
Boot Optimized Storage
Subsystem (BOSS)
Not Supported
• 2x M.2 240GB (RAID 1 or No RAID) 1x M.
2 240GB (No RAID only)
Server management
• Dell Open Manage featuring Dell
Management Console
• Lifecycle Controller 3.0
• iDRAC8 Enterprise
• Dell Open Manage featuring Dell
Management Console
• Lifecycle Controller 3.0
• iDRAC9 Enterprise
I/O slots
• 1x8 Gen3 (x16 connector) FH/HL • 1x8 Gen3 (x16 connector) FH/HL
6