Dell EMC PowerMax 2000 - Procedure A: Working with the Customers Electrician Onsite

Procedure A: Working with the customer's electrician onsite
Use this procedure if the customer’s electrician is available at the installation site.
This procedure requires three basic tasks that alternate between the customer's
electrician, the Dell EMC CE and back to the customer's electrician.
l
Task 1: Customer's electrician
l
Task 2: Dell EMC Customer Engineer (CE)
l
Task 3: Customer's electrician
Best Practices Guide for AC Power Connections
16 Best Practices Guide for AC Power Connections PowerMax 2000 and PowerMax 8000 with PowerMaxOS