Dell EMC PowerProtect DD6900 - Page 104

2 |--------|--------|--------|--------|
| Pack 1 | Pack 2 | Pack 3 | Pack 4 |
E(49-60) |. . s |. . s |- - - |- - - |
D(37-48) |. . . |. . . |- - - |- - - |
C(25-36) |. . . |. . . |- - - |- - - |
B(13-24) |. . . |. . . |- - - |- - - |
A( 1-12) |. . . |. . . |- - - |- - - |
|--------|--------|--------|--------|
-------------- ----------------------------------------------
Legend State Count
------ ------------------- -----
. In Use Disks 32
s Spare Disks 2
- Not Installed Disks 30
------ ------------------- -----
Total 34 disks
● For a new DS60:
# disk show state
Enclosure Disk
Row(disk-id) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-------------- ----------------------------------------------
1 . . . .
2 |--------|--------|--------|--------|
| Pack 1 | Pack 2 | Pack 3 | Pack 4 |
E(49-60) |. . . |. . . |. . . |. . . |
D(37-48) |. . . |. . . |. . . |. . . |
C(25-36) |. . . |. . . |. . . |. . . |
B(13-24) |. . . |. . . |. . . |. . . |
A( 1-12) |. . s |. . s |. . s |. . s |
|--------|--------|--------|--------|
3 |--------|--------|--------|--------|
| Pack 1 | Pack 2 | Pack 3 | Pack 4 |
E(49-60) |. . . |- - - |- - - |- - - |
D(37-48) |. . . |- - - |- - - |- - - |
C(25-36) |. . . |- - - |- - - |- - - |
B(13-24) |. . . |- - - |- - - |- - - |
A( 1-12) |. . s |- - - |- - - |- - - |
|--------|--------|--------|--------|
-------------- ----------------------------------------------
Legend State Count
------ ------------------- -----
. In Use Disks 74
s Spare Disks 5
- Not Installed Disks 45
------ ------------------- -----
Total 79 disks
● For a new ES40:
# disk show state
Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
--------- -------------------------------------------------
1 s . . .
2 . . . . . . . . . . . . . . s
3 . . . . . . . . . . . . . . s
--------- -------------------------------------------------
Legend State Count
------ --------------- -----
. In Use Disks 31
s Spare Disks 3
------ --------------- -----
Total 34 disks
4. Display the current alerts on the system.
Run the following command: alerts show current
# alerts show current
No active alerts.
5. Resolve all displayed alerts.
104
Add Storage Capacity