EasyManua.ls Logo

Dell EMC PowerProtect DD6900 - Configuring Additional System Parameters

Dell EMC PowerProtect DD6900
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IPV6 Default Gateway
Enter the ipv6 default gateway IP address:
8. Enter up to three DNS servers to use for resolving host names to IP addresses. Use a comma-separated or space-separated
list. Enter a space for no DNS servers. Or accept the IP addresses of the DNS servers, if the system was able to discover
them.
DNS Servers
Enter the DNS Server list (zero, one, two or three IP addresses):
192.168.10.1
9. A summary of the network settings is displayed. You can accept the settings (Save), reject the settings and exit to the CLI
(Cancel), or return to the beginning of the current section and change the settings (Retry). Entering Retry displays your
previous responses for each prompt. Press Return to accept the displayed value or enter a new one.
Pending Network Settings
Hostname dd6900.example.com
Domain name example.com
Default Gateway 192.168.10.1
DNS Server List 192.168.10.1
----- ------- ------- ---- ------------------------------------
--------------- ---- ------------------
ethMa yes running no 192.168.10.1 255.255.252.0
n/a
fe80::3680:dff:fe42:2660** /64
2620:0:170:2532:3680:dff:fe42:2660** /64
ethMb no down ipv4 n/a n/a
n/a
ethMc no down ipv4 n/a n/a
n/a
ethMd no down ipv4 n/a n/a
n/a
eth5a no down no n/a n/a
n/a
eth5b no down no n/a n/a
n/a
eth6a yes running no (not specified) (not
specified) n/a
fe80::f6e9:d4ff:fe7f:eea0 /64
eth6b yes running no (not specified) (not
specified) n/a
fe80::f6e9:d4ff:fe7f:eea1 /64
eth6c no down no n/a n/a
n/a
eth6d no down no n/a n/a
n/a
eth8a no down no n/a n/a
n/a
eth8b no down no n/a n/a
n/a
eth8c no down no n/a n/a
n/a
eth8d no down no n/a n/a
n/a
----- ------- ------- ---- ------------------------------------
--------------- ---- ------------------
Do you want to save these settings (Save|Cancel|Retry):
Configuring additional system parameters
About this task
Most installations would benefit from the configuration of a few additional system parameters, provided in this section for
convenience.
NOTE:
You can also use the DD System Manager GUI interface to configure the system parameters. Open a web browser,
and enter your system IP address in the browsers address text box. Log in when the DD System Manager login screen
displays. Use the DD System Manager online help for more information.
80 Configure System for Use

Table of Contents

Related product manuals